An Entity of Type: WikicatNetworkProtocols, from Named Graph: http://dbpedia.org, within Data Space: dbpedia.org

The arbitrated loop, also known as FC-AL, is a Fibre Channel topology in which devices are connected in a one-way loop fashion in a ring topology. Historically it was a lower-cost alternative to a fabric topology. It allowed connection of many servers and computer storage devices without using then very costly Fibre Channel switches. The cost of the switches dropped considerably, so by 2007, FC-AL had become rare in server-to-storage communication. It is however still common within storage systems.

Property Value
dbo:abstract
  • The arbitrated loop, also known as FC-AL, is a Fibre Channel topology in which devices are connected in a one-way loop fashion in a ring topology. Historically it was a lower-cost alternative to a fabric topology. It allowed connection of many servers and computer storage devices without using then very costly Fibre Channel switches. The cost of the switches dropped considerably, so by 2007, FC-AL had become rare in server-to-storage communication. It is however still common within storage systems. * It is a serial architecture that can be used as the transport layer in a SCSI network, with up to 127 devices. The loop may connect into a fibre channel fabric via one of its ports. * The bandwidth on the loop is shared among all ports. * Only two ports may communicate at a time on the loop. One port wins arbitration and may open one other port in either half or full duplex mode. * A loop with two ports is valid and has the same physical topology as point-to-point, but still acts as a loop protocol-wise. * Fibre Channel ports capable of arbitrated loop communication are NL_port (node loop port) and FL_port (fabric loop port), collectively referred to as the L_ports. The ports may attach to each other via a hub, with cables running from the hub to the ports. The physical connectors on the hub are not ports in terms of the protocol. A hub does not contain ports. * An arbitrated loop with no fabric port (with only NL_ports) is a private loop. * An arbitrated loop connected to a fabric (through an FL_port) is a public loop. * An NL_Port must provide fabric logon (FLOGI) and name registration facilities to initiate communication with other node through the fabric (to be an initiator). Arbitrated loop can be physically cabled in a ring fashion or using a hub. The physical ring ceases to work if one of the devices in the chain fails. The hub on the other hand, while maintaining a logical ring, allows a star topology on the cable level. Each receive port on the hub is simply passed to next active transmit port, bypassing any inactive or failed ports. Fibre Channel hubs therefore have another function: They provide bypass circuits thatprevent the loop from breaking if one device fails or is removed. If a device is removedfrom a loop (for example, by pulling its interconnect plug), the hub’s bypass circuitdetects the absence of signal and immediately begins to route incoming data directlyto the loop’s next port, bypassing the missing device entirely. This gives loops at leasta measure of resiliency—failure of one device in a loop doesn’t cause the entire loopto become inoperable. (en)
  • L'interface FC-AL (Fibre Channel - Arbitrated Loop, en anglais) est un protocole de communication en point à point. FC-AL s'appuie le plus souvent sur un support fibre optique mais supporte néanmoins des câblages en cuivre beaucoup moins onéreux. Le FC-AL peut être utilisé dans des architectures SAN offrant de hauts niveaux de performance pour les systèmes de stockage en informatique. Les débits peuvent atteindre 400 Mo/s, ce qui est utile dans les applications utilisant beaucoup de bande passante, telles que la vidéo. On peut aussi se servir de FC-AL dans des solutions RAID ou dans des connexions réseau local ou WAN. FC-AL permet de supporter plusieurs protocoles en même temps sur une même installation. On peut donc imaginer une installation FC-AL gérer des périphériques SCSI tout en utilisant TCP/IP. (fr)
  • FC-AL (англ. Fibre Channel Arbitrated Loop — кольцо волоконно-оптического канала с арбитражем, ещё называют управляемая петля) — топология высокоскоростного интерфейса передачи данных, используемый для взаимодействия рабочих станций, мейнфреймов, суперкомпьютеров и систем хранения данных, построенное на базе волоконного канала. Данная технология может использоваться для создания NAS на базе решений устройств хранения данных с применением волоконного канала. Резервируемые (англ. redundant) конфигурации составляются из двух или четырёх колец Порты устройств могут быть подключены напрямую друг к другу (point-to-point), быть включены в управляемую петлю (arbitrated loop) или в коммутируемую сеть, называемую фабрикой (англ. fabric). Эта топология используется концентраторами арбитрируемых петель (также предлагаемых компанией HP, но не описываемыми в данной публикации) для подключения множественных устройств нодов портов петель (Порты NL_) в конфигурациях FC-AL петель или хабов, без преимуществ от создания мультипереключающихся фабрик. Поддерживаются следующие режимы работы: * режим переключенная — топология обеспечивает единственное логическое соединение между двумя устройствами NL_Порт. Концентратор динамически конфигурирует различные логические пути передачи, и во всех случаях, соединенные NL_Порты имеют доступ к 100% из доступной пропускной способности; * режим совместного использования — соединяет множественные NL_Порты в конфигурацию с хабом (или звезда) без преимуществ от создания переключающихся фабрик. Концентратор поддерживает соединение вплоть до 125 арбитрируемых в петли устройств и каскадированных хабов.Оригинальный текст (англ.)[показатьскрыть]Arbitrated loop — This topology uses arbitrated loop switches (offered by HP but not described in this publication) to connect multiple device node loop ports (NL_Ports) in an FC-AL or hub configuration without benefit of a multiswitch fabric. The following modes of operation are supported: * Switched mode topology provides a single, logical connection between two device NL_Ports. The switch dynamically configures different logical transmission paths, and in all cases, connected NL_Ports have access to 100% of the available bandwidth. * Shared mode arbitrated loop topology connects multiple device NL_Ports in a hub (or star) configuration without benefit of a switched fabric. The switch supports connection of up to 125 arbitrated loop devices and cascaded hubs.— «SAN High Availability Planning Guide. SAN High Availability Planning Guide. Third Edition (June 2003)» (англ.) (ru)
dbo:thumbnail
dbo:wikiPageID
  • 1918926 (xsd:integer)
dbo:wikiPageLength
  • 3283 (xsd:nonNegativeInteger)
dbo:wikiPageRevisionID
  • 927639218 (xsd:integer)
dbo:wikiPageWikiLink
dbp:wikiPageUsesTemplate
dcterms:subject
gold:hypernym
rdf:type
rdfs:comment
  • The arbitrated loop, also known as FC-AL, is a Fibre Channel topology in which devices are connected in a one-way loop fashion in a ring topology. Historically it was a lower-cost alternative to a fabric topology. It allowed connection of many servers and computer storage devices without using then very costly Fibre Channel switches. The cost of the switches dropped considerably, so by 2007, FC-AL had become rare in server-to-storage communication. It is however still common within storage systems. (en)
  • L'interface FC-AL (Fibre Channel - Arbitrated Loop, en anglais) est un protocole de communication en point à point. FC-AL s'appuie le plus souvent sur un support fibre optique mais supporte néanmoins des câblages en cuivre beaucoup moins onéreux. Le FC-AL peut être utilisé dans des architectures SAN offrant de hauts niveaux de performance pour les systèmes de stockage en informatique. FC-AL permet de supporter plusieurs protocoles en même temps sur une même installation. On peut donc imaginer une installation FC-AL gérer des périphériques SCSI tout en utilisant TCP/IP. (fr)
  • FC-AL (англ. Fibre Channel Arbitrated Loop — кольцо волоконно-оптического канала с арбитражем, ещё называют управляемая петля) — топология высокоскоростного интерфейса передачи данных, используемый для взаимодействия рабочих станций, мейнфреймов, суперкомпьютеров и систем хранения данных, построенное на базе волоконного канала. Данная технология может использоваться для создания NAS на базе решений устройств хранения данных с применением волоконного канала. Резервируемые (англ. redundant) конфигурации составляются из двух или четырёх колец (ru)
rdfs:label
  • Arbitrated loop (en)
  • FC-AL (fr)
  • FC-AL (pl)
  • FC-AL (ru)
owl:sameAs
prov:wasDerivedFrom
foaf:depiction
foaf:isPrimaryTopicOf
is dbo:wikiPageRedirects of
is dbo:wikiPageWikiLink of
is foaf:primaryTopic of
Powered by OpenLink Virtuoso    This material is Open Knowledge     W3C Semantic Web Technology     This material is Open Knowledge    Valid XHTML + RDFa
This content was extracted from Wikipedia and is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License